Downdraft Dust & Fume Collector / Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Downdraft dust and fume extractor / collector. Attach a 1.25" vacuum host for suction.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I make a mess at my desk when I'm sanding 3d printed resin parts. There are also a lot of fumes when I use a soldering iron to smooth out FDM prints or when I solder wires together.
This design is my attempt to make a simple 20x20cm downdraft dust / fume extractor that doesn't require a motor or any wiring. You can simply attach any vacuum that has a 1.25 inch connector to the port and all the dust will be sucked into your vacuum.
I have a hepa filter on my vaccum, so this should be very useful.
March 6, 2024 - Beta version released. The design has not been printed or tested for tolerances yet.
.step files included should you wish to make changes.