1 / 4
Yogurt/salad cup with lid for topping. And spoon — zdjęcie 1
1 / 4

Yogurt/salad cup with lid for topping. And spoon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A multi-compartment container for yogurt (or other creamy solids), salads, or the like.

Ocena
0 / 5
Polubienia
7
Pobrania
31
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A container for yogurt (or other creamy solids), salads, or the like. Has a divider for included spoon and a top lid for toppings.

The container total is 15cm x 8,7cm. The main container is 9cm and the top container 5cm.

Please note: While I've done what I can to make a tight fit (tight threads and more), the container is NOT completely watertight. It WILL drip after a bit no matter how tight you close the lid. That being said, I've used it for yogurt and other more creamy, solid stuff for a while now, and that works just fine :-)

No parts other than the spoon (see below) needs supports.

As for the spoon, printing it can be difficult since it needs to be standing upright, and using support will fill the base thread/hole with support filament. Using a Brim, distance 0, might help. If you use Cura Slicer, install the amazing 'Cylindric Custom Support' by 5Axes, and use the 'Freeform > Bridge' support type to add a bridge support halfway up.

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 S1

Rafts:

No

Supports: 

No

 

 

Category: Containers

Tagi