1 / 1
Busbar Cover (EVE 280ah, Envision 305Ah)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increased wall thickness, improved clip design, STEP file included.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 237
- Wydruki
- 0
- Wyświetlenia
- 1242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
I had some issues with the original model from AuroraProjects, the covers didn't want to snap to the bus bars, and some of them cracked on the outer walls.
I replicated the original design from the STL in onshape, with the follwing changes:
- ~1.6mm wall thickness, instead of ~1.1mm
- changed location of cutouts for balancer leads (one in each corner, instead of one directly above one of the clips)
- changed clip design, to better snap on the bus bars (at least for the ones included with my Envision 305ah Cells from nkon.nl)
I also included the STEP file, if anybody wants to do other changes.
Printed in PETG on Bambulab P1P without cooling, first tests worked fine.