*OLD* Tool-Grid 22mm Wheel Lock Key Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
** NEW SET HAS RELEASED **
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wheel Lock Key Holder for Matco Tool-Grid Tool Box organizer system. Holds one 22mm Hex Wheel Lock Key however I made the diameter of the socket 26mm for a loose fit and ease of inserting and removing the key from the holder as well as slightly curved edges for appearance. The bolts that come with the Tool-Grid kit will work perfectly fine with this and bolt hole is useable.
WILL NOT SCALE (effectively), it will cause the Tool-Grid mounting hole to be improperly sized.
- Basic Print Settings
Material: PLA
Layer Height: 0.20mm or 0.10mm for better appearance
Infill: 15%
- Dimensions
Height: 17.3mm
Diameter: 32mm
- Socket Dimensions
Diameter: 26mm
Depth: 10mm
Surface Height: 7.3mm