Pegboard mount for Park Tool FR-5.2H - Cassette Lockring Tool with Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pegboard mount for Park Tool FR-5.2H - Cassette Lockring Tool with Handle
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it.
I was able to print this without supports, but tree supports for the cleat channels may help
About the cleats
I included 2 different cleats (depending on how tight they end up printing) and the step file for them so you can modify them as needed. They print just fine without supports and I have been using PLA for it without issue (quick to print more if you break them). I also found that sometimes I needed to deburr them to get them to slide easily. But it's also kinda nice if they don't slide super easily if you are doing a semi-permeant. You can just lightly use a hammer to get them to slide all the way down.
If they break off, Ive just used a hammer and a small screwdriver to back them out of the groove