Caravan water filler cap cover - TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised Caravan water filler cap cover - TPU. Modelled for Jayco Silverline water filler.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is revised version of caps for the Caravan water filler spout.
Better fit, better positioned loop and a Jayco logo version.
It has a little loop to enable you to tie it on to something to prevent loss.
While designed for the spouts fitted on the Jayco Silverline, it will most likely fit other caravan water fillers.
Print in TPU.
I printed it in pre-dried Elegoo TPU 72D, green on a Creality K1 Max.
2 walls
4 bottom layers
First layer 60 mm/s
Outer wall 200 mm/s
Inner wall 300 mm/s
230 degree nozzle temp
40 degree bed temp
no supports required