FLSUN QQ-S Pro Ball-Effector assembly frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small modification of the assembly frame from https://www.thingiverse.com/thing:4918775. In the original…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small modification of the assembly frame from https://www.thingiverse.com/thing:4918775.
In the original design you can not insert the end pieces of the rods. In this version there is a cutout for the small flags (where the springs are inserted).
The length from center to center was 286mm (in the original design 288mm). It is best to measure this when you mount the arms.
Important: When the arms are mounted, set the length with
M665 L286
Parts used:
Rods https://www.roboter-bausatz.de/p/carbon-rohr-40-cm?number=RBS13324
Balls https://www.roboter-bausatz.de/p/rostfreie-stahlkugel-mit-m4-gewinde?number=RBS10734
Also have a look at my small modification to use optical limit switches: https://www.thingiverse.com/thing:5435060
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,16
Infill:
25%
Filament: Material4Pint PLA black
Category: 3D Printer Parts