BALOONR - biggest penis/ball pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
KDxGP BALOONR
Check out my socials and other things at https://linktr.ee/KDxGP
Like my creations?
Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP.
Thank you!
when big is not big enough
All tubes you can buy are too small? You want big? And I mean really big? Then check out BALOONR! This DIY two-part 3D printed tube has you covered!
Make sure you print the parts sturdy and not weak. You will need to post-process your print for a smooth finish to have a comfortable fit. But most of all to have it water/airtight. I highly recommend using an epoxy coating. Also check out how to print water/airtight.
Besides the printed parts you will need:
10x M5x15 socket head cap screw
10x M5 hex nuts
20mm x 3mm (25/32" x 1/8") adhesive foam tape (search for door weather stripping)
Happy pumping and growing!