1 / 3
Calligraphy nib holder in an Altoids tin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your calligraphy nibs safe in an Altoids tin! Fits regular nibs and the tiny crow quill nibs, too!
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (53)Powiązane
I wanted something that worked well to hold my working pen nibs (the ones that aren't used yet are in a separate container). An Altoids tin seemed perfect, but I didn't want a big pile of them in the tin; I wanted something neater. I remixed and combined SylvainKlein's Calligraphy Nibs Storage and bill de_cat's Altoids template to create something that would work for me!
- Print the rotating part with the openings face down.
- You will need to paint some supports under the pegs on the sides. I found that organic supports in Prusa Slicer popped right off, with no finishing work needed!
- The openings for the nibs might be slightly tight, but I found that an x-acto knife poked in there did the trick to open them up. They worked without that, but worked better afterward :)
Filament I used:
Prusament PLA Galaxy Silver