Elgoo Neptune 4 Pro cura profile (tested with results!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Refined profile for the neptune 4 pro in Cura. Based on the Balanced 0.2mm profile from Elgoo. Rename to .curaprofile
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 1177
- Wydruki
- 1
- Wyświetlenia
- 4718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock N4P.
I recently picked up a neptune 4 pro to start learning and tweaking with klipper. This is a profile based on the Balanced Fast 0.2mm profile provided by Elgoo. The intent of this profile is to print fast, but still have high quality. I've included presliced files with photos of my results as well as the true print time from fluidd.
You need to use the large part cooling fan on the gantry to get similar results.
Profile highlights:
- 3-3-3 perimeters
- 15% infill
- 225/60c
- 250mm/s print speed
- 100mm/s outer wall
- 5000mm/s acceleration