2-Channel Fader Bridge (26mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fader bridge for joining 2 neighboring channels for stereo signals, or other grouping applications.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 236
- Wydruki
- 0
- Wyświetlenia
- 1208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
A fader bridge for joining 2 neighboring channels for stereo signals, or other grouping applications.
Designed for my Allen & Heath mixer, but should work on other brand mixers with 26mm length fader caps. (Mine has 14mm in-between faders, but the clips should work fine with any minor varation in spacing.)
Included are 2 thicknesses depending on material used. I found 1mm works fine with PLA so they're not too difficult to detach. But 1.5mm works great with nylon (see photo), and probably good with PETG.
I've also included a “C” type variant that can be printed without supports, and easily lengthened/shortened depending on the application.