1 / 1
2510 fan antivibration gasket (Ender 3 V3 SE/KE) — zdjęcie 1

2510 fan antivibration gasket (Ender 3 V3 SE/KE)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An anti-vibration gasket for 2510 fan

Ocena
0 / 5
Polubienia
34
Pobrania
145
Wydruki
0
Wyświetlenia
1057
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My Ender 3 V3 KE hotend fan caused a lot of vibration and made the whole gantry resonate. When I bought a new original replacement part, I realized that all these fans have the same issue: causing a lot of vibration. The only way to minimize this is to somehow isolate or dampen the vibrations transferring to the whole gantry body. So, I designed a little TPU antivibration gasket.

The model's thickness is 2mm but if you like you can resize only the Z value to make it thinner or thicker. 

It's a small fan and this is quite a small gasket so your printer must be able to print TPU decently. You may need longer screws as the ones provided are already too short.

Tagi