1 / 2
Fluval Spec V Petbank CY-109 Autofeeder Mount — zdjęcie 1
1 / 2

Fluval Spec V Petbank CY-109 Autofeeder Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fluval Spec V mount for Petbank CY-109 autofeeder with the stock lid and light.

Ocena
0 / 5
Polubienia
5
Pobrania
52
Wydruki
0
Wyświetlenia
453
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

This mount holds a Petbank CY-109 autofeeder on a Fluval Spec V without needing to remove the lid. The chute directs food into the space between the end of the stock light and lid.

I find this feeder works well with nano foods, especially mixing nano pellets for the fish, and larger shrimp foods.

The base allows the feet to stick through, and you can add the suction cups back on to hold the assembly together.

OpenSCAD file is also provided, this is one of my first openscad designs so it is a little convoluted (it could be remade with far fewer lines).  I only use it for vacations so I favored stability over looks, but you could definitely reduce the amount of material if desired.

Prints with no supports.  I used PLA with 25% infill and 0.2mm layers.

Tagi