Meat injector case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a nice case for an inexpensive stainless meat injector that can be found at your favorite online retailer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this is a nice case for an inexpensive stainless meat injector that can be found at your favorite online retailer. I suspect it will work with many similar models. The main body of the injector should be around 32mm in diameter, the 2 large needles are 5mm, and the smaller is 3mm.
It has a cover with an injector logo on top, if you have a dual color capable printer (I made mine on a Bambu Lab printer). I also included the orignal cover without the logo.
Post-Printing
I used two 22mm M3 screws in the hinges to join the top and bottom (see photo above). No tapping should be required, but go slow so you don't split either hinge.