2010 Ford Expedition Cup Holder Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup Holder Insert for 2010 Ford Expedition
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a removable insert for the front dual cup holder in a 2010 Ford Expedition.
My rubber one went missing, so I designed a replacement.
Printed with the top plate against the bed, no supports are needed as bridging is suffice.
For a better quality print, I suggest slowing your bridge speeds down, this will result in a better/tighter finish on the inside of the cup holder base, and make it easier to wash out when needed.
I printed at 4 walls and 70% infill (because I use PLA and I wanted it to have more material to withstand the summer heat), but in hindsight, that was extreme overkill.