Faster Printing Elongated Underdesk Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an elongated version of the drawer by Paul that is modified to print faster.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The model was elongated to the same length as the remix by Ernesi to use his remixed side supports. It uses a separately modeled solid bottom which should be printed with grid infill and zero bottom and top layers. This replaces the hex grid pattern with pure grid infill which prints MUCH faster.
This needs to be accomplished by editing settings in the slicer for the bottom body separately from the rest of the shelf.
There is also a stepped cutout in the shelf so that the grid infill has more support where it connects to the rest of the shelf to give it strength.
This remix prints in under 4 hours vs over 5 on a Prusa MK4IS with 0.2 layer height structural setting.