Pentax D-LI68 Battery and SD / MicroSD holder (with STEP file)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 8/26/2021 - I uploaded the STEP file for easier remixing.
These are battery and SD/MicroSD card holders for a Pentax D-LI68 battery (for the Pentax Q). There are 6 total, with 3 types, plain, with an SD card holder and with a Micro SD card holder. Each type has a model with a clip and without a clip. The models with clips will print with supports unless you crank up the overhang %. I printed some with supports (lines) and they were easily removed so that is how I would recommend printing them. I did only printed the micro-SD version with the clip so far and it fits the battery, and micro SD cards pretty good but everyone's printer is a bit different.
I'd also recommend using more than 40% infill and walls that are at least 0.8mm thick, so the clip has enough strength, I printed with 40% and it does not seem to be weak. Please orient these so they print with the open end up.
Current version is M3
Category: Camera