1 / 4
Vernier Calliper Peg Bracket  (with the power of magnetism) — zdjęcie 1
1 / 4

Vernier Calliper Peg Bracket (with the power of magnetism)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers:…

Ocena
5 / 5
Polubienia
17
Pobrania
83
Wydruki
1
Wyświetlenia
502
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers:

Bracket vernier calliper (Peg mount) (https://www.thingiverse.com/thing:2866877) by ArneBanane

Pegboard 2 position blank - squared up and cleaned up (https://www.thingiverse.com/thing:2832370) by cmh

Thanks to ArneBanane and CMH for posting them!

This is just a pegboard mount for a vernier caliper. It has a hole in case it needs some help staying on the pegboard, and there is also a place to put a 8mm x 3mm cylindrical magnet in the back of it to help hold the calipers in place. I normally use Gorlilla Glue to do that but any good plastic glue would work. You can find the magnets at Amazon by searching for B0714KZP5C. The mount is a tight fit for my pegboard, but holds it really well (I did not need to use a screw), thanks to the well designed pegboard blank by CMH.

I suggest printing this in the tall or vertical orientation with a raft or brim, and supports everywhere, I used 30% infill and 1.2mm sides and base, but that is probably more than is needed for something like this.

 

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables to see what new stuff I post. 

 

 Thanks for looking!

 

Category: Tool Holders & Boxes

Tagi