MiSTer USB Bridge and Bracket Protectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slides over the MiSTer USB bridge or USB bracket to protect the exposed pins from shorts/damage. Designed to fit snug…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slides over the MiSTer USB bridge or USB bracket to protect the exposed pins from shorts/damage.
Designed to fit snug with tight tolerances, YMMV with your 3D printer.
For the USBbracket, use "Detect thin walls" and 1 perimeter in PrusaSlicer.
Fits more-or-less flush against the aluminium case from Porkchop Express.
Buy prints of this item
I offer prints of these items and other stuff in my Ko-Fi shop:
Bridge protector: https://ko-fi.com/s/9595eff70c
Bracket protector: https://ko-fi.com/s/1440b42afb
Support my work
If you like my designs, please consider making a donation via my Ko-fi page. Thanks!
Category: Electronics