Hulk Multipart - assembly required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the Hulk Multipart but don't have a dual extruder. So I modified the parts to be printed separately and then…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 358
- Wydruki
- 1
- Wyświetlenia
- 1421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the Hulk Multipart but don't have a dual extruder. So I modified the parts to be printed separately and then assembled.
Printed at 100% and fully assembled, Hulk is 8.777" tall.
I have included 2 versions of the pants; the original pants had holes in it but I didn't want to make separate parts for the legs that show through those holes, so I removed the holes and printed the pants solid.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator+
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
5%
Filament: iSanmate PLA Color Change Green/Yellow
Notes:
Printed 5 shells thick
Category: Sculptures