4oz Ashford Spinning Wheel Bobbin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an ashford spinning wheel bobbin that holds 4oz of fiber
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 809
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a spinning wheel bobbin designed for use on an Ashford Joy wheel, but it fits any Ashford spinning wheel that uses their standard bobbin.
This design is for your everyday spindle. It still holds more than the wood ashford bobbins, but is an easy size for storage too. No supports needed. One bobbin can fit on a Prusa M3 bed.
Glue part 1 and part 2 together to create the ridge for scotch tensioning band.
It uses 100mm of McMaster Carr: 8628K28 "Wear-Resistant Nylon Tube, 1/16" Wall Thickness, 1/2" OD, 3/8" ID, 5 Feet Long" (one tube will make 15 bobbins)
and two of McMaster Carr: 91145A246 Electrical-Insulating Nylon 6/6 Sleeve Washer for 1/4" Screw Size, 0.25" ID, 0.499" Overall Height, Packs of 100 (one pack will make 50 bobbins)