Bambu D1 Mini ESP32 ESP-WROOM-32 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Light Controller Case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1892
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Works with Bambu Lab X1, X1C, and P1P printers.
Uses two (2) Bambu Bus Cables (one comes with each AMS).
Items Needed to Construct the D1 Mini ESP32 ESP-WROOM-32 with 24v Power Tap:
- An ESP32 Wroom (available on Amazon)
- LM2596 DC-DC Buck Converter Step Down Module (available on Amazon) You will need to adjust the output power to 5v.
- Power Tap Kit and extra Bambu Bus Cable for sale at 3DMachinist (Etsy Store). Order the V1.3 version of the Power Tap.
Installation
Install the mount on the back of the printer using two M3x22mm screw. One hole may need to be tapped or use a self threading screw (M3).
A test print is included to verify your version of the ESP32 will work with this case.
Recommendations
- Filament: PETG Gray
- Infill: 25%
- Support: Yes, Tree
Home Assistant Smart LEDs using WLED and ESP8266
Two helpful links for building LED Controller using ESP8266
https://blog.ktz.me/home-assistant-smart-leds-using-wled-and-esp8266/
If you would like to buy me a cup of coffee.