Polaroid Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A typical 4 sided box with slots to store Polaroids. The box can fit the Fujifilm Instax photos
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Box Description:
Originally printed on the Neptune 3 Pro the Polaroid Box I made for you today. Is a simple box that can hold a polaroid on each side in a slot opening from the top.
It can hold a Fujifilm Instax polaroid(the smallest size)
The slot size is 9.725cm(3.829in) by 5.56cm(2.189in). If your worried about the box not holding the photos, Don't Worry! because the octagonal shape prevents the photo from falling out of the front.
The size of the actual box(inside) is 7.80cm(3.071in) by 7.80cm(3.071in) by 10.10cm(4in) which is perfect for office supplies, fake flowers, etc…
Changes for future:
- Add more sizes for other polaroid's out there
- More designs
- General changes for easier printing
Specifics:
Printer: Elegoo Neptune 3 Pro
Supports: If your printer is good at bridging it shouldn't need supports but I would recommend printing with supports.
Time: 11hr and 22min
Temp: 200c for Nozzle and 65-60 for bed
Speed: 85mm/s
!!This was printed at .24 layer lines cause I needed a quicker print!!
Thank You:
Even if you don't print out this design Thank you for at least checking it out. I am pretty experienced with CAD and 3D printing but this is my first time ever uploading a model. Pls leave a comment on changes or improvements I could make or even if you just like it! Thank you for checking me out and Happy 3D printing.