1 / 2
GL45 Schott Bottle Inlet for HPLC Tubing — zdjęcie 1
1 / 2

GL45 Schott Bottle Inlet for HPLC Tubing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A handy inlet for feeding PTFE tubing into reservoir Schott bottles on HPLC systems.

Ocena
0 / 5
Polubienia
15
Pobrania
95
Wydruki
0
Wyświetlenia
873
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a simple redesign of the hole inlet for GL45 caps for Schott bottles. Our lab technician asked for a model to reduce cost on buying these things from the store. As they are around 20 €/piece, we save a lot of money printing these from PETG (PETG is fine if you only use dilute acids and solvents like ACN or MeOH).

Printed on Bambu P1S with 0.3 mm layer height and 0.6 mm nozzle. You can fit up to 18 of these on the build plate. Print it “upside down” and use supports.

Tagi