1 / 4
Butter Door - Whirlpool/Kitchenaid/Jenn-Air/Amana - WPLW11348580 — zdjęcie 1
1 / 4

Butter Door - Whirlpool/Kitchenaid/Jenn-Air/Amana - WPLW11348580

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement door for the butter tray in refrigerator

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

We purchased a new (to us) home and were disappointed to find that our refrigerator's butter compartment was missing its door.  After a year or so of the butter falling out when we'd open up the refrigerator, I tracked down the replacement part # (WPLW11348580) and was a little shocked at the price of nearly $100.  

I decided to model this replacement which we've been using for a couple weeks now and are really happy with.  

I know this is a really random thing to share online, but who knows, maybe one day someone else can use it as well.  Though our refrigerator is a KitchenAid, I saw online that the same part number was used in Whirlpool/Jenn-Air/Amana as well.  

Even on my XL this was too large to print as a single piece.  I've dovetailed the model into 3 sections as I thought it was a little more aesthetically pleasing that splitting it down the middle.  The lower dovetails are fragile, so be careful snapping it all together.  

The only areas where you may want supports are on Right, Left, Top and Bottom where the Locking Tabs press in, to add a bit of rigidity.

To build this door you'll need to print:

(1) Right
(1) Left
(1) Top
(1) Bottom
(2) Hinges
(4) Locking Tabs
Each of the four window panels (you'll need to arrange them 1-4 when installing for the pattern to continue properly).
(8) Window clips

When I originally designed this, I planned to get some Plexiglas for the window area, but remembered I had a spool of clear PETG and decided to model these window panels.  They're a bit of an afterthought, and the clips that I added to help secure them to the frame will likely need a drop of superglue to stay in position since they only have 1mm to attach to.  

Tagi