1 / 5
Flight Rudder (yaw) pedals for the PS4 DualShock Joystick HOTAS / HOSAS — zdjęcie 1
1 / 5

Flight Rudder (yaw) pedals for the PS4 DualShock Joystick HOTAS / HOSAS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flight yaw pedals for Akaki's HOTASSet. With the bigger printer (X5S) you can print the platform Body as a one piece,…

Ocena
0 / 5
Polubienia
39
Pobrania
72
Wydruki
0
Wyświetlenia
2291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

Flight yaw pedals for Akaki's HOTASSet. With the bigger printer (X5S) you can print the platform Body as a one piece, for the smaller ones use the L&R halfs and the connetor bar.

You'll also need extra parts: +1m length 4/2mm bowden-tube and M10 tube connectors (printable https://www.thingiverse.com/thing:1993384)

For the control cable use filament (PETG preferred) with the bowden tube. Glue (cyanoacrylat) the the filament in to Yaw Arm, center the controller's stick and Yaw bar. Insert the pin on the right hand Yaw bar's hole (push till click). Pull the control cable (filament) through the pin and secure either with small screw or glue.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

10%


Filament:

PLA PLA Black

Notes:

For the Body, set the bottom layers to '0'. This way platform stays more secure on the carpet and you'll save filament&printing time.

Category: Toy & Game Accessories

Tagi