Trach Hose Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps to keep trach hoses from disconnecting.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A common issue with trach/ventilator hoses is they can randomly disconnect. Depending on level of disability this can be very dangerous so I took it upon myself to solve that. This is meant for the whisper swivel section of the hose and may not fit your setup. A hair tie type rubber band is recommended but a normal rubber band could work too. Also needed are two zip ties. I included two different size bottom adapters for additional support but I didn't need them.
-Print “A” parts on the side where the zip ties would be inserted, paint in supports for the hook and other thin protruding section.
-Print “B” parts curve side down with supports.
-30% infill or greater.
-Recommend printing in PETG, ABS, ASA or PC.