BambuLab PTFE Guide V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
another PTFE tube guide for BambuLab printers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
Another PTFE tube guide for the external spool holder. With the first version, the filament ground a notch into the filament holder after some time and the extruder could then no longer draw the filament. So I designed a new version where the PTFE tube goes through the PC4-M10 connector, so there is no abrasion on the mount.
Mounting:
The bracket is mounted with M3 screws. For this purpose I fused M3 thread inserts into the model. The distance between the holes is 18.5 mm. I used M3x10 screws so that the auxiliary part fan could be mounted normally again. Alternatively, you can use M3 screws with a max length of up to 13 mm.
! Important !
Mount the bracket with the PC4-M10 connector facing down, so the tube cant slip through when the extruder draws the filament.