Rugged Box for GL.iNet Beryl AX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix version of the GL iNet box by Clinta, to fit the GL-MT3000 (Beryl AX). The main differences are that the box is deeper to fit the power supply and ethernet cable, it is wider to accomodate the Beryl AX antenna bumps and the shelf that the router sits on is deeper.
I have tweaked the design so that you can line the inside of the box with 0.5mm felt.
In terms of hardware, the hinges and latch are designed to use M3x30mm. I didnt have any laying around at time of posting so I have used an M3x10 from each side.
My print settings:
- 0.2mm layer height
- 13% Gyroid infill
- 3 wall loops
No supports required.
When importing into the slicer, right click on the model and split into objects. Print each part separately.
This version does not require a TPU gasket.