1 / 3
Fixed MMU3 Idler Body and Pulley Body Without those squares — zdjęcie 1
1 / 3

Fixed MMU3 Idler Body and Pulley Body Without those squares

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I removed those squares on the Idler and Pully bodies that repeatedly cause failures

Ocena
0 / 5
Polubienia
3
Pobrania
48
Wydruki
0
Wyświetlenia
594
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has cooled down then they slide right off. I've started printing this model without the squares and it's worked first time.