1 / 1
Black River Truck BRT fingerboard tap holder alignment — zdjęcie 1

Black River Truck BRT fingerboard tap holder alignment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple tool to hold a tap straight to pre tap brt trucks.

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
626
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple tool that slides over the baseplate of Black River Trucks (BRTs).

Use an M1.6 tap to tap the holes, it shouldn't take much pressure to cut the threads. No oil is needed.

M1.6 will fit dynamic screws, NOT brt screws. The screws are NOT compatible.

For printing, you can print without supports, and as it's a small part a smaller layer height like 0.15 works well.

Tagi