1 / 3
Tronxy X5S v2 extruder tension adjuster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I noticed that the original set up (with lefthand screw) puts too much pressure for the soft filamanets causing them…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I noticed that the original set up (with lefthand screw) puts too much pressure for the soft filamanets causing them to jam.
Replacing the original screw with this one allows you to adjust the optimal extruder tension with the 4mm screw (there are the ready made threads)..
Category: 3D Printer Parts