Waveshare 7inch display for RPi/RPi zero enclosure with vesa 50 or 75 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 or 75x75 mount
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 353
- Wydruki
- 1
- Wyświetlenia
- 3405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount.
You will need:
- 8x M3x3.9x5.7 inserts (Ruthex M3)
- 8x M3x6 tapered screws
- 4x M4x5.5x4 inesrts (Ruthex M4S).
For better 50x50 mount strength, mount M4 inserts from the inside, so they are not easy to pull out.
Works with 2 displays (at least I tested it, possibly will work for other models from waveshare with same dimensions):
20mm is for Pi zero version, 35mm variant can enclose display with Raspberry Pi 4/5 installed on it's back. 50mm variant added in V2 in case You want to use NVMe with Pi5.
Enclosure has plenty ventillation, so it should not overheat.
V2 has separate element for cable/connector. There is version for USB cable, for USB-C PD board and blank, that You can use to cut-out for some other connectors.