Belphegor horns Obey me!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belphegor horns. These are HEAVY! Even with the lightest supports!
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 225
- Wydruki
- 1
- Wyświetlenia
- 1637
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Belphegor's horns! They are heavy! Even with the lightest supports. They will need a lot of support to stay in your head. Probably, I haven't tried wearing them. They may be lighter in resin if the walls are thinned enough and hollowed out. I recommend using either super glue and baking soda to glue them together, Or steel stick which will set in five minutes and fill in the gaps between the sections and any voids.
I have included full versions and a 2 part version.
If you find the horns uncomfortable (too close to the face, too far away) let me know. I can adjust the model.
If you orientate the 2 part ones mainly flat for each print they will be faster.
I wanted the keratin line look so I printed the multiple parts, It took a long time but they look good. I used a heat gun to enhance them.