Bright solar-LED-Light for trunk of TESLA Model 3 (2021)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,82 € – 1,01 € netto (bez VAT)
Dla pliku: Tesla-LED-Holder_v3_0.4n_0.1mm_PETG_MK4IS_1h15m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,91 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 1,24 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Bright LED light for the trunk of TESLA model 3 with solar panel to charge the LED-battery and movement sensor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The lights in the TESLA model 3 trunk are much too dim and aftermarket lights are not really better or a very bright one could possibly draw too much current.
So I bought a very bright solar LED outdoor light from amazon (see link below) that come with internal liion battery and a solar panel to charge the battery and a motion sensor, that switch the led on for 30 s.
I design a holder to mount the solar panel to one of the children seat locks on the rear shelf in the vehicle and I design a holder to mount the LED light in the trunk (on top right) on the M6 screw, that often is used for 3D printed hooks.
The solar panel holder is simply clamped to the children seat lock bracket. No screws. Very simple to remove it again if you want to use the lock for its original purpose. You only have to remove the lid, but it is only clamped.
There is a hole to the trunk and you can put the cable throught it very easily.
The ball-joint-holder for the LED light only have to be screwed to a M6-thread that already exists in the trunk on the right side at top.
The original ball-joint of the LED-light is not very precise, so I made my a little to loose, so I add some foil around the ball-joint to fix it (but in the V3 file it is already 0.1mm enlarged). With the foil the LED-light is perfectly fixed to the setted position and the position can still be easily changed.
I printed the solar-panel holder in 2 sliced parts, to get a very robust clamp and need no supports. Please see the 3mf files. I simply put the original step-files twice to the printer sheet, rotate one of them, sink both in to sheet so that the half of each is truncated.
I printed the solar-panel-holder with Prusament PETG black and prusa mk4, 0.4mm nozzle, "0.2mm speed" setting for the solar-panel-holder and 25% infill, 4 perimeter, no rim, no supports.
And the led-holder with "0.1mm fast detail" and 5 perimeter and 80% infill.
I probably shouldn't have printed the led-holder with 0.1mm layer height, but I wanted to make sure that the thread would be good.
If you like, you could still remix the upper part (the end where the ball is not) of the led-holder from cylindrical to hexagonal to mount it easier with a wrench to the M6 screw in the trunk. I added the fusion 360 models to change it.
Parts needed:
- MPJ 56 LED Solar Lights, Outdoor with Motion Sensor:
https://www.amazon.de/gp/product/B0832KFBNV
https://www.amazon.com/dp/B08LKPD52T
Many other solar-LED-lights have the same ball joint on their back and the same mounting layout, but you have to check yourself. - 4x countersunk screws (for wood) 3x15mm
- 2x different printed solar-panel-holder parts from PETG
- 1x printed LED-light-holder part from PETG
- screwdriver