1 / 2
JPN Extruder for CMYK+ colorprinting (CVT) — zdjęcie 1
1 / 2

JPN Extruder for CMYK+ colorprinting (CVT)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The one concern of the previous designhttp://www.thingiverse.com/thing:2195351 was that multiple filaments couldn't be…

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The one concern of the previous design
http://www.thingiverse.com/thing:2195351
was that multiple filaments couldn't be driven at the different velocities.

Using the CVTs for the each filament feeder allows to tune-up the relative velocities.

On this set-up there is () -form solid gear and )( -spring load drive gear. When the arm is pushing )(-gear down the individual filament extrusion is increased (very up disengage, no extrusion).

The the common extrusion speed & direction is managed by the stepper motor driven main gear (through the arms' pivot point).

Category: 3D Printer Parts

Tagi