Shower Hose to Garden Spigot adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to connect a standard shower massage wand to a standard garden hose spigot.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Here's an adapter that connects a standard shower massage wand to a standard garden hose spigot. Looks a lot nicer than the kludge I used to use. I use it bathe my dogs and to rinse off after the pool. Handy at the beach or lake to rinse off when no shower is available.
Printed in ABS at 100% infill for strength. When I tested it under pressure, a couple of pinhole leaks appeared, so I did a two hour acetone polish to make it water tight.
I also did a quick hose washer that I printed in SemiFlex, but it was a little too stiff to seal properly so I ended up using a store bought washer. When I get some Ninjaflex, which is softer, I'll try the washer again.