Expo Dry erase marker holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
At my work we use dry erase markers to write stuff on a board. I didn't like any of the other designs on here because…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At my work we use dry erase markers to write stuff on a board. I didn't like any of the other designs on here because they all kept the tip pointing up. This causes the fluid inside to move away from the tip and make it "dry out". I designed this one so the tip stays pointed down and keeps the ink there.
On the back is spots for 5mm x 5mm x 3mm thick magnets. You can use as many or as little amount of magnets as needed.
I have also included the Fusion 360 file if anyone wants to modify it.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: Maker Geeks (had before they closed) PLA Dark as Night (Black) Post-Printing
Glue in 5 mm x 5 mm x 3 mm thick magnets to allow you to attach to a metal surface.
How I Designed This
I used Fusion 360 to design the part and I have included the file so you can modify it.
Category: Tool Holders & Boxes