Roku 2 XS remote holder VESA 100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my wife's job, she sometimes has to display videos on a TV while talking about a product. She uses a Roku to play…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 146
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my wife's job, she sometimes has to display videos on a TV while talking about a product. She uses a Roku to play the video files and I designed a mounting bracket, http://www.thingiverse.com/thing:1752230, to hold the Roku 2 XS unit to the TV. That way all she has to do is pickup the TV and set it up where she wants it. Everything is all attached to the TV and all she has to do is plug in power.
This design is just a simple box to hold the Roku 2 XS remote in. I designed it so I can use the existing VESA 100 wall mounting holes on the TV. The holder is attached to the TV with two 4mm socket cap screws and will sit flush with the inside of the holder. That way they do no interfere with the remote going in and coming out.
Filament is Just PLA's turquoise: https://www.justpla.com/turquoise-play175-1kg?search=PLAY175TRQ-1KG
Print Settings
Printer:
Wanhao Duplicator i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
If you print the holder with the bottom touching the build plate and the front towards your cooling fans you should have no problems with the screws recessing into the holes.
Attach to the TV with two 4mm socket cap screws. There is a larger hole on the front of the holder to allow you to insert the screw.
How I Designed This
This was all designed in Tinkercad.
Category: Other