Ploopy Adept Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
28-degree wedge to tent the Ploopy Adept.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 176
- Wydruki
- 2
- Wyświetlenia
- 1750
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
3/20/2024
NOTE: it has been brought up that the (legacy) .3mf file does not import geometry correctly into PrusaSlicer or Cura - I saved it using OrcaSlicer, so if you use that it should work like normal.
I apologize for the inconvenience.
I have replace the .3mf file with an oriented .stl file. The .step file works as normal - you just have to orient the model in your slicer of choice yourself.
------------------------------------------------------
This wedge uses the screw holes on the adept base to locate and secure the adept. It has a 0.2mm clearance between the pins and the base.
Step model included to make it easier to change the angle of the wedge.
If you're wondering: the material I used is Galaxy Black Polylite PLA. Looks really sick IMO.