Photo Frame & Storage Box for Polaroid i-Type, 600 and SX-70 film
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recycle your polaroid i-Type, 600 or SX-70 film catridges to a Photo Frame & Storage Box
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model
The model is a photo frame and photo storage box that reuses parts of the Polaroid i-Type, 600 or SX-70 film cartridge.
The model consists of two parts and an optional stand. The frame can be set up directly, hung on the wall or placed in an optional stand.
Several Polaroid photos can be stored in the frame, which - as with the cartridge - is pressed against the frame via the spring. Regardless of whether the frame contains 1 or 12 photos, the top picture always lies perfectly against the frame.
The photos are inserted or removed via a slot at the bottom of the frame, just like in the film cartridge.
Printing
Any solid filament, such as PLA, PETG, etc., is suitable as a filament. All parts can be printed without support. The 3MF files are already optimally aligned for printing.
Settings (All Parts)
- Nozzle: 0.4 mm
- Infill: 15 %
- Supports: No
- Raft: No
- Layer Height: 0.20 mm
The story behind
A Polaroid camera is pretty cool, but there is a problem. Every time you have taken eight (8) photos with your camera, there is a lot of garbage left over in addition to the photos.

Simply throwing them in the trash is environmentally irresponsible and depending on the type of film you use, there are a few things to keep in mind.
Polaroid SX-70 and 600 film
- Outer packaging is made of cardboard. (PAP)
- The packaging of the film catridge is a plastic-aluminum composite.
- The film catridge contains a Licium-ion battery. (Li-ion)
- The film catridge contains a aluminium spring
- The film catridge is made of High Impact Polystyrene (HIPS).

Polaroid i-Type film
- Outer packaging is made of cardboard. (PAP)
- The packaging of the film catridge is a plastic-aluminum composite.
- The film catridge contains a aluminium spring
- The film catridge contains a cardboard to fix the spring
- The film catridge is made of High Impact Polystyrene (HIPS).

So what to do?
Reduce · Reuse · Recycle
Unfortunately, empty film cartridges can’t be reused or recycled to a new one! But the components can be reused.
Disassembly film cartridge
- Crush the opening of the film pack (where the film comes out) with your thumbs to create a larger opening

- Remove the spring and the cardboard (i-Type) or battery (600 or SX-70) from the cartridge
Be careful!
Some of the edges are pretty sharp.
- Seperate the parts

Note: If you disassemble several cartridges: The springs are stackable.
- If it is a 600 oder SX-70 film cartridge, cover the electrical contacts of the battery with a tape to prevent the battery from short-circuiting, overheating and catching fire. Use existing resources, like the pull flag of the cartridge.

Note: Do not dispose of the battery in domestic waste!
You can dispose of batteries at most shops that sell batteries, as well as large shops, supermarkets, town halls, schools and libraries. Your local authority will have information to help you find the best place for you.
Assembly
- Prepare the necessary parts for assembly. You need the spring from the cartridge. Optional you can use the black (The cover sheet that is ejected by the camera after the film is loaded). or white cardboard (only i-Type film) for box labeling.

- Place the spring on the rear cover of the frame. Make sure that the spring snaps into the gap on the rear panel.

- Slide the rear wall cover with the spring into the main frame.

- Insert the photos via the slot at the bottom of the picture frame. Press down the spring so that the pictures can be inserted.
If you want to use the frame as a storage box, you can use the cardoards for labeling.
- Place your photo frame. You can use it as a stand-alone unit, hang it on the wall with the wall mount or place it at an angle with the additional stand.

Remix
To remix the model or make your own changes, you will find the FreeCad Project in the files.