Modular Pistol Rack for CZ, Glock, Walther Pistols
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Pistol Rack for CZ, Glock, Walther 9mm Pistols for most common rifle gun safes
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 2212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Since most common gun safes are primarily made for rifles and have no proper way to store pistols, I made a modular pistol rack for either 2 or 3 pistols with the suitable gun stands for Glock, Walther and CZ 9mm (double stack) pistols.
The stands are screwed to the rack by 4,5x20mm Spax or similar, the rack itself is secured with 5x100mm Spax but this is optional (it will also work without those screws and hold up very well)
All those gun safes have a L shaped ledge where the foam padding is put on to separate the rifles, so you cut down the foam padding by about 15,5cm and put the rack on the ledge.
The holes in the pistol rack can easily be closed in Prusa slicer if you don't want to use them.
CZ: Shadow Series (1&2), TS, CZ75 and Polymer
Glock: G17, G19, G19X, G22, G34, G35, G45, G47
Walther: P99, PPQ Q4 / Q5 Polymer and Steel Frame, PDP
Printed in PLA or PETG
0,2mm layer height
15% infill (grid)
3 perimeters