1 / 2
Petnat Bottle Opener — zdjęcie 1
1 / 2

Petnat Bottle Opener

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This device makes it easy to open bottles of Pet Nat wine.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This device makes it easy to open bottles of Pet Nat wine. It breaks through the crown cap of the bottle and releases the pressure in the bottle in a controlled manner.

All 3d Printed parts are using PLA filament. Models were printed on Ender3 V2 Neo. Wooden side are done from wooden prism. For dimension see attached models or drw. Parts are assembled by using screws for wood. Side holder joint tight not so much, they must move freely.

I hope that this opener will bring you a lot of pleasure while enjoying a good Pet Nat wine. 

Tagi