AD5M Nebula Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of PyroShop's model, designed to fit the Flashforge Adventurer 5M.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the AD5M that allows you to attach a Nebula camera to the frame. I have attached a picture showing the two holes you need to use. You'll need two M3 bolts (I used 8's, but you could get away with longer and maybe shorter) and nuts. The holes in the plastic are tight, so you may need to screw through them, before inserting the bolts through the frame.
The camera clips into the mount very snug, thanks to PyroShop's original design, but if you'd like a little extra security, I'd suggest the camera screw by fonzy: Nebula Camera Screw by fonzy | Download free STL model | Printables.com. I used the small version he uploaded.
I printed all the parts in PETG, .6 nozzle and .3 layer height, 10% gyroid infill. But .4 at .2 and other infills should work with no real issues as well.