Replacement Propeller and Nose Cone for Airfix Quick Build Mustang P-51D Model Kit J6016
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toddler proof....... almost!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement stronger propeller and nose cone for a Quick Build Mustang P-51D Model Kit (J6016). The original propeller lasted just minutes in the hands of a four year old.
This design replaces both the propeller, nose cone and the shaft with a stronger design. It still wont survive a four year old but at least I can print replacements :D
Print the Propeller with a Brim otherwise it will curl, 100% infill
Print the Nose cone vertically on its tip with a raft, 100% infill
The propeller may need a little sanding of the center hole depending on how well your print came out.
If you found this useful, please leave a comment!
Tips are not expected but always welcome.
Thanks, Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Bambulab X1
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
100%
Category: Vehicles