KlackEnder Probe Mount for "Linear Rail X Axis Mod" with "UniTak3D Ender 3 Direct Drive Upgrade Kit"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of my previous belt holder to allow usage of KlackEnder
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Allows for usage of KlackEnder, no other modification required to other STLs. Offset is the same.
Cables need to be fed from the “top”, might require usage of tweezers, but it is possible. I made the holes for .15 variant. Either modify the file to fit your printer's capabilities, or use superglue to secure magnets.
Do note that with linear rail, your Y position will be different than the one mentioned within the original instructions so change accordingly, in my case I had it set to -16.
Please check your nozzle height, normal unmodified MK8 should fit, though be careful with bi-metal heatbreak, they're slightly longer variants, which makes the nozzle slightly lower. It's still usable, though with just 1.6mm of height difference, but keep that in mind if you've made any modifications to your hotend.