1 / 3
Nitril Glove Holder for Honeycomb Storage Wall (HSW)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D model is a nitrile glove holder designed specifically for use with the Honeycomb storage wall system.
- Ocena
- 4,625 / 5
- Polubienia
- 576
- Pobrania
- 2236
- Wydruki
- 8
- Wyświetlenia
- 7792
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 8) (Komentarze: 13)Remiksy (1)Kolekcje (992)Powiązane
This downloadable 3D model is a nitrile glove holder designed specifically for use with the Honeycomb storage wall system by RostaP.
Features:
- Compatibility: Seamlessly integrates with Honeycomb storage wall panels.
- Material: Designed for use with a standard nitrile glove box.
- Functionality: Holds gloves securely for easy access and organization.
Required:
- Nitril glove box with the measures (240mm x 65mm x 120mm)
- 3x Single Insert for HSW (e.g. on MakerWorld)
Printing Tips:
- Use a filament color that complements your Honeycomb storage wall for a cohesive look.
- Adjust your printer settings based on the desired strength and durability.
- Manual support is added where needed.
- I recommend using PLA that does not string or reduce the outer wall speed to 60-75 mm/s.
Additional Information:
- Difficulty Level: Easy
- Print Time: ~4 ½ hours
Changelog:
- 10/03/2024 - Initial Release
- 19/01/2025 - Version 2
- Changed size to match regular US & EU sizes of 240mm x 65mm x 120mm
- reduced needed support
I hope you find this model useful!
Like this 3D model?
☕ Show your appreciation by buying me a coffee!
👍 Share your creation and leave a comment below with any feedback or suggestions!