Just Another MOSFET Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little enclosure for a Wang DD 22 mosfet, really designed for screwing to a base like mdf.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A little enclosure for a Wang DD 22 mosfet, really designed for screwing to a base like mdf.
Shield and carrier should print without supports as oriented. Shroud may need internal supports for the overhang though my friend has printed it fine without. Photos are from an early design that had a separate fan grate piece - this is now integrated into the fan shroud piece.
The fan shroud has holes for a 40mm cooling fan to cool the heat sink.
The shroud and shield hold the wang carrier down to a base via pressure once they are screwed into a base.
Wang carrier holes are threaded M3x0.5 x5mm deep.
Print instructions
Category: 3D Printer Accessories