Mario Block Tissue Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tissue box cover that fits perfectly!
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
A tissue box cover I made for my son when he was ill. Fits Puffs brand tissue perfectly, as it was my reference point, but may also fit many other brands of tissues.
- Internal dimensions: L: 115mm W: 121mm H: 132mm
If you want it “kid-tough”, I suggest using 3 perimeter layers.
All the dots and decor adhere with a light layer of CA glue. I used a few strips masking tape to make sure that they stayed in place while it cured.
- If you use the making tape over the dots and lettering to fix it where you want it, then peel up one side, apply the glue, and stick it back down, it works nicely for placement and doesn't mess up the hard work. Use the square from the question mark to properly space the top to the question mark from the top of the box.
I suggest placing the dots, lettering and box >face down< on the print bed for the best look and function. No need to scale. Gcode is oriented and ready to print as is.
Have fun and make something happy!