articulated Abyssal Ghostshark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an articulated print-in-place ghostshark with movable fins, no supports or brim needed
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 372
- Wydruki
- 2
- Wyświetlenia
- 959
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
For the next model i bring you the pointy-nosed blue chimaera, also refered to as the abyssal ghostshark. Technically it isn't a shark, but it's one of my favourite deep sea creatures and they look absolutely fascinating. The joints of the fins may seem stuck at first, but after moving them around a bit they should work just fine.
Model size: 213.4 mm x 126.5 mm x 43.5 mm
This model is only for private use, please don't sell or upload my models or prints.
The model is print-in-place and is perfectly fine to print with no supports or a brim.
I haven't tried scaling the model, so i can't say how well it'll work.
As always, if you decide to print one of these cute creatures, i would love to see them. This one especially I would love to get feedback on how well the fin joints print, since they are a bit experimental for me.
Printer: Anycubic Vyper
Print settings: 10% Infill, 0.2mm layer height, no brim, no supports
Printer settings: 200°C nozzle temp. (0.4mm), 60°C bed temp.
Filament: PLA (in the pictures: Geeetech wood)
If there are any other issues please let me know so i can try and fix them.